Cisco has released free software updates that address the vulnerability described in this advisory. Customers may only install and expect support for software versions and feature sets for which they have purchased a license. By installing, downloading, accessing, or otherwise using such software upgrades, customers agree to follow the terms of the Cisco software license:

https://www.cisco.com/c/en/us/products/end-user-license-agreement.html

Additionally, customers may only download software for which they have a valid license, procured from Cisco directly, or through a Cisco authorized reseller or partner. In most cases this will be a maintenance upgrade to software that was previously purchased. Free security software updates do not entitle customers to a new software license, additional software feature sets, or major revision upgrades.

When considering software upgrades, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories and Alerts page, to determine exposure and a complete upgrade solution.

In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.

Customers Without Service Contracts

Customers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco TAC:
https://www.cisco.com/c/en/us/support/web/tsd-cisco-worldwide-contacts.html

Customers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.

Fixed Releases

Customers should upgrade to an appropriate release as indicated in the table(s) in this section. To help ensure a complete upgrade solution, consider that this advisory is part of a collection that includes the following advisories:
In the following table(s), the left column lists major releases of Cisco software. The center column indicates whether a major release is affected by the vulnerability described in this advisory and the first minor release that includes the fix for this vulnerability. The right column indicates whether a major release is affected by all the described in this collection of advisories and the current recommended release for those .

Note: For a complete fix, both the or Software on the head-end device and the Mobility Client must be upgraded.

ASA Software

Cisco ASA Major Release First Fixed Release for This Vulnerability Recommended Fixed Release for All the Vulnerabilities Described in this Collection of Advisories
Prior to 9.11 Not vulnerable2 9.1.7.20
9.1 Not vulnerable2 9.1.7.20
9.2 Not vulnerable2 9.2.4.27
9.1 Not vulnerable2 9.4.4.14
9.4 Not vulnerable2 9.4.4.14
9.51 Not vulnerable2 9.6.4.6
9.6 Not vulnerable2 9.6.4.6
9.7 9.7.1.24 9.7.1.24
9.8 9.8.2.28 9.8.2.28
9.9 9.9.2.1 9.9.2.1

1 Cisco ASA Software releases prior to 9.1 and ASA releases 9.3 and 9.5 have reached End of Software Maintenance. Customers should migrate to a supported release.
2 2.0 for AnyConnect features are first supported as of software release 9.7.1.

The software is available for download from the Software Center on Cisco.com by navigating to Products > Security > Firewalls > Adaptive Security Appliances (ASA) > ASA 5500-X Series Firewalls, where there is a list of ASA hardware platforms. The majority of these software releases are listed under Interim.

FTD Software

Cisco FTD Major Release First Fixed Release for This Vulnerability Recommended Fixed Release for All the Vulnerabilities Described in this Collection of Advisories
6.0 Not vulnerable1 Cisco_FTD_SSP_Hotfix_EI-6.1.0.7-2.sh (41xx and 9300 FTD hardware platform)

Cisco_FTD_Hotfix_EI-6.1.0.7-2.sh (All FTD hardware platforms except 41xx and 9300)

6.0.1 Not vulnerable1 Cisco_FTD_SSP_Hotfix_EI-6.1.0.7-2.sh (41xx and 9300 FTD hardware platform)

Cisco_FTD_Hotfix_EI-6.1.0.7-2.sh (All FTD hardware platforms except 41xx and 9300)

6.1.0 Not vulnerable1 Cisco_FTD_SSP_Hotfix_EI-6.1.0.7-2.sh (41xx and 9300 FTD hardware platform)

Cisco_FTD_Hotfix_EI-6.1.0.7-2.sh (All FTD hardware platforms except 41xx and 9300)

6.2.0 Not vulnerable1 6.2.0.5
6.2.1 Migrate to 6.2.2 Hotfix Cisco_FTD_SSP_Hotfix_BD-6.2.2.3-4.sh.REL.tar (41xx and 9300 FTD hardware platforms)

Cisco_FTD_SSP_FP2K_Hotfix_BD-6.2.2.3-4.sh.REL.tar (21xx FTD hardware platform)

Cisco_FTD_Hotfix_BD-6.2.2.3-4.sh.REL.tar (All other FTD hardware platforms)

6.2.2 Cisco_FTD_SSP_Hotfix_BD-6.2.2.3-4.sh.REL.tar (41xx and 9300 FTD hardware platforms)

Cisco_FTD_SSP_FP2K_Hotfix_BD-6.2.2.3-4.sh.REL.tar (21xx FTD hardware platform)

Cisco_FTD_Hotfix_BD-6.2.2.3-4.sh.REL.tar (All other FTD hardware platforms)

Cisco_FTD_SSP_Hotfix_BD-6.2.2.3-4.sh.REL.tar (41xx and 9300 FTD hardware platforms)

Cisco_FTD_SSP_FP2K_Hotfix_BD-6.2.2.3-4.sh.REL.tar (21xx FTD hardware platform)

Cisco_FTD_Hotfix_BD-6.2.2.3-4.sh.REL.tar (All other FTD hardware platforms)

6.2.3 Cisco_FTD_SSP_Hotfix_A-6.2.3.1-10.sh.REL.tar (41xx and 9300 FTD hardware platforms)

Cisco_FTD_SSP_FP2K_Hotfix_A-6.2.3.1-10.sh.REL.tar (21xx FTD hardware platform)

Cisco_FTD_Hotfix_A-6.2.3.1-10.sh.REL.tar (All other FTD hardware platforms)

Cisco_FTD_SSP_Hotfix_A-6.2.3.1-10.sh.REL.tar (41xx and 9300 FTD hardware platforms)

Cisco_FTD_SSP_FP2K_Hotfix_A-6.2.3.1-10.sh.REL.tar (21xx FTD hardware platform)

Cisco_FTD_Hotfix_A-6.2.3.1-10.sh.REL.tar (All other FTD hardware platforms)

1 Remote Access VPN features are first supported as of software release 6.2.1.

The software is available for download from the Software Center on Cisco.com by navigating to Products > Security > Firewalls> Next-Generation Firewalls (NGFW), where there is a list of possible FTD hardware platforms.

AnyConnect Secure Mobility Client

Cisco AnyConnect Secure Mobility Client Major Release First Fixed Release for This Vulnerability Recommended Fixed Release for All the Vulnerabilities Described in this Collection of Advisories
Prior to 4.41 Not vulnerable Not applicable2
4.4 Affected; migrate to 4.6 Not applicable2
4.5 Affected; migrate to 4.6 Not applicable2
4.6 Not vulnerable Not applicable2

1 SAML 2.0 SSO features are first supported as of software release 4.4.00243.
2 This is the only vulnerability of this collection of advisories that affects the Cisco AnyConnect Secure Mobility Client.

The software is available for download from the Software Center on Cisco.com by navigating to Products > Security > VPN and Endpoint Security Clients > Cisco VPN Clients > AnyConnect Secure Mobility Client > AnyConnect Secure Mobility Client v4.x.



Source link

LEAVE A REPLY

Please enter your comment!
Please enter your name here